Aeroflex Tube Insulation     AEROFLEX Closed Cell Tube Insulation is easily installed to pipe or tubing. The factory-applied coating of talcum powder on the thick and smooth inner skin helps facilitate and speed up pre-assembly lines. When applied to existing lines, tubing should be slit lengthwise and snapped into place. Slitting can be done on the job easily with razors, blades, knives or shears. Cut edges and joints can be sealed with Aeroseal Adhesive (neoprene base contact cement).

Aeroflex Standard Sheet (S - series)     The standard sheet is available in size of 36" x 48" and wall thickness from 1/8" to 2" and 0.5m x 2.0m with the wall thickness from 3 mm upto 50 mm. It prevents heat loss and condensation on large pipelines, tanks, chillers, air ducts and other irregular shaped vessels.

Aeroflex Precut Sheet Insulation (P - series)     The precut sheets are ready-cut in sizes to suit large pipe sizes ranging from 4" IPS upwards (1/2" to 2" wall thickness are available in 48" length). The precut series makes fabrication easier and more economical because wastage is eliminated. Moreover, Aeroflex precut sheet is manufactured to nominal thickness with smooth and dense skins on both surfaces. In addition to excellent insulating properties, the precut sheet also has greater resistance to water vapor penetration and water absorption.

Aeroflex Continuos Sheet Roll (SR - series)     AEROFLEX sheet insulations are also available in continous roll form. Aeroflex continous sheet rolls are available from 1/8"(3 mm) to 2"(50 mm) thickness, 48"(1,220 mm) width x 13' to 100' length or 1,000 mm width x 3 metres length.     All insulating sheets are made from the same material as Aeroflex tubing.