|
| Besides
being the ideal insulation for chilled and hot water piping, Aeroflex is
also used as insulation for all kinds of ducting systems. Aeroflex has been favoured over fibrous insulating materials mainly because of the possible dangers and health dangers and health hazards caused by fibrous materials. Aeroflex, made from special modified elastomeric material ensures long service life and can be safely handled without any danger of skin irritation. It is also not hazardous to health so no special precaution is needed. Aeroflex has superior resistance against moisture, fungus growth, vermin and rodent attack. Not messy and easy to install, it is also neat in appearance because of its smooth surface. With low water absorption and low moisture transmission, Aeroflex can be used both as an internal and external insulation for all kinds of ducting systems. To suit different decorative purposes. Aeroflex can also be coated with Aerocoat, an acrylic latex emulsion paint. |
| Ambient Condition |
Operating
Temperature
|
|||
|
60
°F
(15.5 °C) |
55
°F
(12.7 °C) |
50
°F
(10 °C) |
45
°F
(7.2 °C) |
|
| 80 °F(26.6 °C) 50% RH |
1/4"
(6 mm)
|
1/4"
(6 mm)
|
1/4"
(6 mm)
|
3/8"
(6 mm)
|
| 80 °F(29.4 °C) 70% RH |
3/8"
(9 mm)
|
3/8"
(9 mm)
|
3/8"
(9 mm)
|
1/2"
(12 mm)
|
| 90 °F(32.2 °C) 80% RH |
5/8"
(15 mm)
|
3/4"
(19 mm)
|
3/4"
(19 mm)
|
1"
(25 mm)
|
| 90 °F(32.2 °C) 85% RH |
1"
(25 mm)
|
1"
(25 mm)
|
1"
(25 mm)
|
1-1/4"
(32 mm)
|
 |
 |
| Aeroflex is also available in continous sheet roll form to suit different need. |
Net appearance when used as an external insulation for air ducts. |
 |
 |
| Because of its many advantages, Aeroflex is being used widely in airducting systems. |
Aeroflex does not contain any fibrous material, so it is safe to use in direct contact with air. |
 |
 |
