AEROCOAT®, Pure Acrylic Emulsion Paints.

AEROCOAT® is a water based paint formulated with selected pure acrylic emulsion mixed with other special chemicals. Excellent for coating especially onto Aeroflex Insulation surfaces giving greater protection against ultraviolet rays or other adverse weather conditions.     Having elongation properties of more than 400% and with good adhesion promotor, AEROCOAT can stay very firmly and permanently to the coated surface without any problems of peeling. Its superb flexibility ensures no cracking even if the coated insulation surface is squeezed or compressed.     With additional characteristics including fungus resistance, AEROCOAT will be able to provide a smoothing aesthetic appearance while acting as a durable protective shield which can last for more than 10 years.     Available in shades of white, blue, green and black. AEROCOAT can be painted onto pipe insulation surfaces giving easy identification of the different pipe functions.

APPLICATION

Dilute AEROCOAT with clean water at 5-10% by volume. Stir thoroughly before applying with brush or roller. All surface to be applied must be thoroughly clean, free from oil, grease or other contaminant. In case of a surface that has been painted before, all odd paint must be removed as much as possible. Make sure surface is not chalky before applying. AEROCOAT will be very efficient with just an application of 2-3 coatings. A drying time of at least 2-3 hours must be allowed before a 2nd coating can be done onto the same surface again. If desired, repeat same procedure for application of 3rd coating. No primer needed. 1 US gallon can cover approximately 36 sq. m per coat.

PRECAUTION

Non flammable and non toxic. Mix AEROCOAT with water in accordance to amount needed. Avoid mixing more than required as it is not advisable to store AEROCOAT that is mixed with water for more than 5 days. Keep out of reach from children.

COLOR SHADES

Available in 12 shades : Deep Blue       Cream Light Blue        Grey Deep Green     Black Light Green     White Brown             Off white Yellow             Red AEROCOAT can be mixed together to obtain any desired grey, blue or green shadings. Other shades can also be achieved by mixing with high quality acrylic color master batch. Do not mix AEROCOAT with master batch by more than 10% by volume.

PACKING

1/4 US Gallon (0.946 litres) available in can. 1 US Gallon (3.785 litres) available in can. 5 US Gallon (18.925 litres) available in pail.

PHYSICAL PROPERTIES

Type	Selected 100% acrylic emulsion paint
Appearance	Semi-Gloss
Specific Gravity	1.20 - 1.30 g/cubic cm
Viscosity	90-95 KU at 25 °C
Elongation	More than 400%
Freezing Point	-5 °C
Flammability	Self-Extinguishing
Fungus Resistance	Excellent
UV & Tropical Climate	Excellent
Weathering Resistance Coverage Area	30-40 sq. m/ US. Gallon/ coat
Drying Time (at 25 °C, 70% RH)	Touch Dry 20-30 minutes Recoat 2-3 hours
Dry Film Thickness	35-40µ